Home/ Stepper Motors & Drivers/Gears and Pulleys

Handheld Digital Oscilloscope with LCRT Tester


Handheld Digital Oscilloscope with LCRT Tester
Images/37982-large.jpg   California Proposition 65 Warning
Stock Number: 37982 TE
  Be the first to review this item
$59.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Includes Probe
Unique Digital Oscilloscope (DSO) with built-in component tester, PWM signal generator and other functions. Suitable for testing, screening & matching transistors, identification of mixed components.
Large color dot matrix TFT display. Built-in 1500mAh rechargeable lithium battery.
Display: 2.4 inch TFT color screen, LED backlight
Charging Port:: USB Type-C, +5V
DIGITAL OSCILLOSCOPE
Probe: 100MHz P6100
Sample Rate: 2.5mS/S
Bandwidth: 0 - 200kHz
Input Impeadtance: 1Mohm
Coupling: AC/DC
Input Voltage Range:
1X Probe: 80Vpp (±40V)
10X Probe: 800Vpp (±400V)
Vertical Sensitivity:
10mV/Div - 10V/Div (in 1-2-5 increments)
Adjustable Vertical Offset with indication
Horizontal Time Base:
10us/Div - 500s/Div (in 1-2-5 increments)
Trigger Mode:
Auto, Normal and Single Shot
Trigger Polarity: Rising or Falling edge
Trigger Level: Adjustable, with indication
Automatic Measurement:
Maximum, minimum, average, rms,
peak-to-peak, Frequency, Period & Duty cycle.
PWM Output: 0 - 80KHz, Duty cycle: 0~100%, Amplitude: 5.0V
COMPONENT TESTER
Transistors: hfe, base-emitter voltage Vbe, Ice,
collector-emitter reverse cut-off current Iceo, Ices
Forward Voltage: Vf
Diode:
Forward Voltage Vf@<5Vf:
Forward Voltage Drop, Junction Capacitance, Reverse
Leakage Current
Zener
0.01 - 4.5V (1-2-3 test area) forward voltage drop, reverse breakdown voltage
Reverse Breakdown Voltage: 0.01 - 24V (K-A-A test area)
FET
J FET
Gate Capacitance Cg, drain current Id at Vgs, protection
diode forward voltage drop Vf
IGBT
Drain current Id at Vgs, protection diode forward voltage
drop Vf
MOSFET
Turn-on voltage Vt, gate capacitance Cg, drain-source
resistance, protection diode forward voltage drop Vf
SCR/TRIAC: Turn-on voltage <5V, gate trigger current
<6mA. Gate voltage
CAPACTANCE: 25pF - 100mF
Capacitance value, loss factor Vloss
RSISTANCE: 0.01 - 50ohms
Value
INDUCTANCE: 10uH - 1000uH
Value, DC resistance.
BATTERY: 0.1 - 24.5V
Voltage value, polarity
VOLTAGE: 0~16V
TEMPERATURE: DS18B20 sensor
Temperature value
HUMIDITY: DHT1 sensor
Humidity value
PWM: 1.tKHz - 9.99MHz
IR: NEC protocol infrared code
Infrared remote control decoding
Display user code and data code, and display the corresponding infrared waveform
L: 79mm W: 31mm H: 103mm WT: .9

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


Recently Viewed Items